20 or more:
158,92 EUR
50 or more:
157,54 EUR
200 or more:
156,16 EUR
500 or more:
154,78 EUR
1000 or more:
153,40 EUR
2500 or more:
152,01 EUR
300058740 - 1:10 RC Porsche Carrera RSR 2.8 BT-01
Deliverytime: 3 - 5 working days (Mo-Fr) *
available: > 10
Key points at a glance:
Product Description
1:10 RC Porsche Carrera RSR 2.8 BT-01
Item no.: 300058740
Item description: 1:10 RC Porsche Carrera RSR 2.8 BT-01
The Porsche Carrera RS 2.7 is a legend in the 911 series. It was developed in 1973 to take part in the European GT races. It has a 2,687cc 6 cylinder engine with 210hp and a lightweight body with improved aerodynamics. The RSR 2.8 racing version had a revised 2,808cc engine with over 300hp and won the European GT racing series in 1973.
The model is delivered on the TAMIYA BT-01 chassis in the short wheelbase, mid-engine and rear-wheel drive (MR) version.
The TAMIYA BT-01 chassis is a beginner-friendly chassis that offers 6 different drive and chassis variations.
The wheelbase can be built in 257mm and 251mm. Furthermore, the chassis is based on the drive systems of real cars and can be built as front-engine or mid-engine with front-wheel drive or rear-wheel drive.
The enclosed body is unpainted.
Required accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for body
2WD kit model, BT-01 chassis,
Elect. Speed controller, 540 torque
tuned motor, unpainted polycarbonate
body with add-on parts, suspension struts,
independent suspension, tread tyres,
instructions
ATTENTION!
Before you start assembling the model, you should have read and understood all the instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools including knives are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly.
If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.
Caution! Not suitable for children under 14 years of age.
Product details
- 1/10 scale kit model
- Length: 457mm, width: 204mm, wheelbase: 138mm (WB: 251mm = short)
- Beginner-friendly BT-01 2WD chassis
- 2 wheelbases can be built (257mm and 251mm)
- Freely selectable drive concepts:
- Front- or rear-wheel drive
- Front- (FR) or mid-engine (MR)
- Independent suspension on all four wheels
- Easily accessible gearbox units, engine and suspension for quick conversion and maintenance
- Electronic speed controller included
- Detailed polycarbonate body (unpainted) with add-on parts
- Many tuning parts optionally available
Item no.: 300058740
Item description: 1:10 RC Porsche Carrera RSR 2.8 BT-01
The Porsche Carrera RS 2.7 is a legend in the 911 series. It was developed in 1973 to take part in the European GT races. It has a 2,687cc 6 cylinder engine with 210hp and a lightweight body with improved aerodynamics. The RSR 2.8 racing version had a revised 2,808cc engine with over 300hp and won the European GT racing series in 1973.
The model is delivered on the TAMIYA BT-01 chassis in the short wheelbase, mid-engine and rear-wheel drive (MR) version.
The TAMIYA BT-01 chassis is a beginner-friendly chassis that offers 6 different drive and chassis variations.
The wheelbase can be built in 257mm and 251mm. Furthermore, the chassis is based on the drive systems of real cars and can be built as front-engine or mid-engine with front-wheel drive or rear-wheel drive.
The enclosed body is unpainted.
Required accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for body
2WD kit model, BT-01 chassis,
Elect. Speed controller, 540 torque
tuned motor, unpainted polycarbonate
body with add-on parts, suspension struts,
independent suspension, tread tyres,
instructions
ATTENTION!
Before you start assembling the model, you should have read and understood all the instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools including knives are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly.
If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.
Caution! Not suitable for children under 14 years of age.
Product details
- 1/10 scale kit model
- Length: 457mm, width: 204mm, wheelbase: 138mm (WB: 251mm = short)
- Beginner-friendly BT-01 2WD chassis
- 2 wheelbases can be built (257mm and 251mm)
- Freely selectable drive concepts:
- Front- or rear-wheel drive
- Front- (FR) or mid-engine (MR)
- Independent suspension on all four wheels
- Easily accessible gearbox units, engine and suspension for quick conversion and maintenance
- Electronic speed controller included
- Detailed polycarbonate body (unpainted) with add-on parts
- Many tuning parts optionally available
