20 or more:
141,26 EUR
50 or more:
140,03 EUR
200 or more:
138,80 EUR
500 or more:
137,57 EUR
1000 or more:
136,34 EUR
2500 or more:
135,11 EUR
300058735 - 1:10 RC Motul Autech Z 2023 TT-02
Deliverytime: 3 - 5 working days (Mo-Fr) *
available: > 10
Key points at a glance:
Product Description
Item no.: 300058735
Designation: 1:10 RC Motul Autech Z 2023 TT-02
The Motul Autech Z was used by the NISMO team in the 2023 Super GT series. Although the racing car is very similar to the Z road car, it is a racing car through and through: It has a complete carbon fibre body and a 550PS 2 litre 4-cylinder turbo engine. The original won the first race in Okayama in 2023.
The 58735 TAMIYA 1:10 scale model is based on the tried-and-tested TT-02 chassis. The wheelbase, ground clearance, track and gear ratio can be adjusted in many ways and the chassis can be quickly tuned into a racer with the countless optional tuning parts. The 4WD drive with central shaft, double wishbones and suspension struts on all four wheels ensure a true-to-life driving experience and optimum traction. The underside of the chassis has an extra smooth design and the battery compartment accommodates all standard battery types. A visual highlight are the wheel drivers, which have attached dummy brake discs.
Required accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger
4WD kit model, TT-02 chassis,
Elect. Speed controller, 540 torque
tuned motor, unpainted polycarbonate
body with add-on parts, cardan drive,
suspension struts, independent suspension,
tread tyres, hull frame chassis,
instructions
ATTENTION!
Before you start assembling the model, you should have read and understood all the instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools including knives are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly.
If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.
Caution!Not suitable for children under 14 years of age.
Product details
- 1/10 scale kit model
- Beginner-friendly TT-02 chassis - Extremely robust
- Length: 468mm, width: 188mm, height: 120mm, wheelbase: 257mm
- Encapsulated 4WD all-wheel drive
- Prototypical, pre-painted 1.0mm polycarbonate body
- ABS add-on parts: side mirrors and large rear wing
- 6-spoke rims with 26mm tyres
- independent front and rear suspension
- electronic cruise control
- many optional tuning parts available
Designation: 1:10 RC Motul Autech Z 2023 TT-02
The Motul Autech Z was used by the NISMO team in the 2023 Super GT series. Although the racing car is very similar to the Z road car, it is a racing car through and through: It has a complete carbon fibre body and a 550PS 2 litre 4-cylinder turbo engine. The original won the first race in Okayama in 2023.
The 58735 TAMIYA 1:10 scale model is based on the tried-and-tested TT-02 chassis. The wheelbase, ground clearance, track and gear ratio can be adjusted in many ways and the chassis can be quickly tuned into a racer with the countless optional tuning parts. The 4WD drive with central shaft, double wishbones and suspension struts on all four wheels ensure a true-to-life driving experience and optimum traction. The underside of the chassis has an extra smooth design and the battery compartment accommodates all standard battery types. A visual highlight are the wheel drivers, which have attached dummy brake discs.
Required accessories:
Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger
4WD kit model, TT-02 chassis,
Elect. Speed controller, 540 torque
tuned motor, unpainted polycarbonate
body with add-on parts, cardan drive,
suspension struts, independent suspension,
tread tyres, hull frame chassis,
instructions
ATTENTION!
Before you start assembling the model, you should have read and understood all the instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools including knives are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly.
If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.
Caution!Not suitable for children under 14 years of age.
Product details
- 1/10 scale kit model
- Beginner-friendly TT-02 chassis - Extremely robust
- Length: 468mm, width: 188mm, height: 120mm, wheelbase: 257mm
- Encapsulated 4WD all-wheel drive
- Prototypical, pre-painted 1.0mm polycarbonate body
- ABS add-on parts: side mirrors and large rear wing
- 6-spoke rims with 26mm tyres
- independent front and rear suspension
- electronic cruise control
- many optional tuning parts available
