20 or more:
60,48 EUR
50 or more:
59,95 EUR
200 or more:
59,43 EUR
500 or more:
58,90 EUR
1000 or more:
58,37 EUR
2500 or more:
57,85 EUR
MAX96BO - MAXI Bag for Bloodborne: The Board Game - Chalice Dungeon
Deliverytime: 6 - 8 working days (Mo-Fr) *
Key points at a glance:
Product Description
The nightmare continues. A vast labyrinth exists deep beneath Yharnam. Cruel beasts and terrifying bosses await in the darkness. The Chalice Dungeon expansion for "Bloodborne: The Board Game" comes with 35 new miniatures and lots of new game material. So that you have one less thing to worry about in the dark and so that you can transport the contents of the expansion safely and neatly, we provide you with this Feldherr MAXI bag with the matching foam inserts.
Spread over five half-size inserts, all the miniatures of your Chalice Dungeon expansion for "Bloodborne: The Board Game" are neatly and safely stowed away in this bag. Whether it's the Watchdog of the Old Lords, one of the 4 Hunters or simple Labyrinth Rats, you can assign the right compartment to each figure. Precisely fitting compartments for each individual model ensure that the figures do not slide around or bump into each other during transport. This also protects the colours of the painted miniatures from abrasion and scratches.
Once your figures are packed, let's move on to your game material. Sort the playing cards into the lowest insert. To make it easier for you to remove the cards, the corresponding card compartments have finger-thick cut-outs. The set comes with a plastic card holder that you fit into the large card compartment. This allows you to neatly store the abundance of cards. Of course, the cards also fit with protective sleeves.
The supplied foam mats and foam lid ensure that your miniatures and cards are packed securely and survive transport to the game with your friends undamaged.
To ensure that everything fits neatly into the bag, we recommend arranging the inserts as follows. Take one of the identical inserts and stack it on top of the next higher one. Then place the thicker foam mat and the square tiles on top. Stack the remaining trays on top of each other and place the mat on the top insert. Finally, the foam lid secures the contents of the inserts. Instructions, trick weapon dashboards, PvP screens and tarot cards can be placed on the lid.
The Feldherr MAXI bag is made from particularly hard-wearing material. Padded side panels and a reinforced base ensure that the miniatures are also optimally protected during transport by car or train.
In addition to the large main compartment, the bag has a small compartment with a zip at the front. Here you can store writing utensils and other small items, for example.
There is a rubberised, handy carrying handle on the top. If you prefer to have your hands free, you can also carry the bag comfortably as a shoulder bag thanks to the sturdy, detachable shoulder strap.
As with all 3D-printed models, there may be minor imperfections. The product images are only examples of what the finished product may look like. Colours may vary. All products are supplied unpainted.
Details
- high quality, foam
- Made in Germany
- chlorine-free and acid-free
- thermoplastic
- no assembly required - ready to play
- 3D printed in Germany
Contents
- 1 Feldherr MAXI bag
- 2 half-size foam inserts for 10 miniatures each (HSMFAZ070BO)
- 1 half-size foam insert for 5 larger miniatures (HSMFAZ070BO) - 1 half-size foam insert for 5 larger miniatures (HSMFAZ070BO)foam insert for 5 larger miniatures (HSMEJK060BO)
- 1 half-size foam insert for 5 larger miniatures (HSMEJK050BO)
- 1 half-size foam insert and 1 card holder for 4 Hunter miniatures + 4 small miniatures + playing cards (HSFW045BO + 59879)
- 1 foam mat, 4 mm, as height compensation
- 1 foam mat, 10 mm, as height compensation
- 1 foam lid
Dimensions
MAXI bag
- Inside: approx. 345 mm x 275 mm x 180 mm
- Outside: approx. 390 mm x 330 mm x 190 mm
Foam inserts
- HSMFAZ070BO: 275 mm x 172 mm x 70 mm total height (60 mm usable height + 10 mm base)
- HSMEJK060BO: 275 mm x 172 mm x 60 mm total height (50 mm usable height + 10 mm foam base)
- HSMEJK050BO: 275 mm x 172 mm x 50 mm total height (40 mm usable height + 10 mm base)
- HSFW045BO: 275 mm x 172 mm x 45 mm total height (35 mm usable height + 10 mm base)
Spread over five half-size inserts, all the miniatures of your Chalice Dungeon expansion for "Bloodborne: The Board Game" are neatly and safely stowed away in this bag. Whether it's the Watchdog of the Old Lords, one of the 4 Hunters or simple Labyrinth Rats, you can assign the right compartment to each figure. Precisely fitting compartments for each individual model ensure that the figures do not slide around or bump into each other during transport. This also protects the colours of the painted miniatures from abrasion and scratches.
Once your figures are packed, let's move on to your game material. Sort the playing cards into the lowest insert. To make it easier for you to remove the cards, the corresponding card compartments have finger-thick cut-outs. The set comes with a plastic card holder that you fit into the large card compartment. This allows you to neatly store the abundance of cards. Of course, the cards also fit with protective sleeves.
The supplied foam mats and foam lid ensure that your miniatures and cards are packed securely and survive transport to the game with your friends undamaged.
To ensure that everything fits neatly into the bag, we recommend arranging the inserts as follows. Take one of the identical inserts and stack it on top of the next higher one. Then place the thicker foam mat and the square tiles on top. Stack the remaining trays on top of each other and place the mat on the top insert. Finally, the foam lid secures the contents of the inserts. Instructions, trick weapon dashboards, PvP screens and tarot cards can be placed on the lid.
The Feldherr MAXI bag is made from particularly hard-wearing material. Padded side panels and a reinforced base ensure that the miniatures are also optimally protected during transport by car or train.
In addition to the large main compartment, the bag has a small compartment with a zip at the front. Here you can store writing utensils and other small items, for example.
There is a rubberised, handy carrying handle on the top. If you prefer to have your hands free, you can also carry the bag comfortably as a shoulder bag thanks to the sturdy, detachable shoulder strap.
As with all 3D-printed models, there may be minor imperfections. The product images are only examples of what the finished product may look like. Colours may vary. All products are supplied unpainted.
Details
- high quality, foam
- Made in Germany
- chlorine-free and acid-free
- thermoplastic
- no assembly required - ready to play
- 3D printed in Germany
Contents
- 1 Feldherr MAXI bag
- 2 half-size foam inserts for 10 miniatures each (HSMFAZ070BO)
- 1 half-size foam insert for 5 larger miniatures (HSMFAZ070BO) - 1 half-size foam insert for 5 larger miniatures (HSMFAZ070BO)foam insert for 5 larger miniatures (HSMEJK060BO)
- 1 half-size foam insert for 5 larger miniatures (HSMEJK050BO)
- 1 half-size foam insert and 1 card holder for 4 Hunter miniatures + 4 small miniatures + playing cards (HSFW045BO + 59879)
- 1 foam mat, 4 mm, as height compensation
- 1 foam mat, 10 mm, as height compensation
- 1 foam lid
Dimensions
MAXI bag
- Inside: approx. 345 mm x 275 mm x 180 mm
- Outside: approx. 390 mm x 330 mm x 190 mm
Foam inserts
- HSMFAZ070BO: 275 mm x 172 mm x 70 mm total height (60 mm usable height + 10 mm base)
- HSMEJK060BO: 275 mm x 172 mm x 60 mm total height (50 mm usable height + 10 mm foam base)
- HSMEJK050BO: 275 mm x 172 mm x 50 mm total height (40 mm usable height + 10 mm base)
- HSFW045BO: 275 mm x 172 mm x 45 mm total height (35 mm usable height + 10 mm base)
