20 or more:
19,09 EUR
50 or more:
18,93 EUR
200 or more:
18,76 EUR
500 or more:
18,59 EUR
1000 or more:
18,43 EUR
2500 or more:
18,26 EUR
HS08SET - Half-size foam set for Ravager
Deliverytime: 9 - 11 working days (Mo-Fr) *
Key points at a glance:
Product Description
In addition to rubble and ashes, the Ravagers leave behind them above all bewilderment. As quickly as they appear, they disappear again. But not without clearing the way for the rearguard and clearing even heavy enemy armour out of the way.
But the Ravager doesn't just present the Dark Eldar's opponents with special challenges. Such a finely detailed miniature has very specific requirements. How good that we have also found the right solution for this and that your filigree model arrives at the gaming table perfectly protected with this customised Feldherr foam set.
The top insert of the set houses the Drukhari gunboat. The filigree model has a compartment here that has been cut to fit the miniature exactly. The base has a recess for the base and the finely detailed equipment on the bow and stern of the ship. The hull of the Ravager rests securely on the foam without the sensitive parts on the underside getting caught in the foam.
This ensures optimum stability during transport. The miniature is safely stored all round and ready for the journey to the gaming table. The high-quality, soft foam not only protects the sensitive elements from damage, but also keeps the colours of the finished miniature intact.
You can store other Drukhari figures, such as Incubi and Archon, in the four compartments next to it.
To make it easier to lift out the ship, simply place the upper section with the miniature on the base on the table.
The lower insert in this set not only serves as a support for the upper section and the base of the Ravager. 10 compartments offer you additional space for further miniatures of your army. They are ideal for infantry and character models on bases up to 32 mm, such as other Incubi, Wyches or Kabalite Warriors.
Details
- high-quality, fine-pored foam
- Made in Germany
- chlorine-free and acid-free
Contents
- 1 half-size foam insert as top section (HSMEXI120BO)
- 1 half-size foam insert as base section (HSMEWX045BO)
Dimensions
- 8 compartments: 57 mm long x 36 mm wide x 35 mm deep
- 4 compartments each with a rounded corner
- 4 compartments each approx. 50 mm long x 50 mm wide x 110 mm deep
- 2 of the compartments have a larger bulge
- 2 compartments: 63 mm long x 33 mm wide x 35 mm deep
Half-size foam inserts
- Top part HSMEXI120BO: 275 mm x 172 mm x 120 mm total height (110 mm usable height + 10 mm base)
- Bottom section HSMEWX045BO: 275 mm x 172 mm x 45 mm total height (35 mm usable height + 10 mm base)
But the Ravager doesn't just present the Dark Eldar's opponents with special challenges. Such a finely detailed miniature has very specific requirements. How good that we have also found the right solution for this and that your filigree model arrives at the gaming table perfectly protected with this customised Feldherr foam set.
The top insert of the set houses the Drukhari gunboat. The filigree model has a compartment here that has been cut to fit the miniature exactly. The base has a recess for the base and the finely detailed equipment on the bow and stern of the ship. The hull of the Ravager rests securely on the foam without the sensitive parts on the underside getting caught in the foam.
This ensures optimum stability during transport. The miniature is safely stored all round and ready for the journey to the gaming table. The high-quality, soft foam not only protects the sensitive elements from damage, but also keeps the colours of the finished miniature intact.
You can store other Drukhari figures, such as Incubi and Archon, in the four compartments next to it.
To make it easier to lift out the ship, simply place the upper section with the miniature on the base on the table.
The lower insert in this set not only serves as a support for the upper section and the base of the Ravager. 10 compartments offer you additional space for further miniatures of your army. They are ideal for infantry and character models on bases up to 32 mm, such as other Incubi, Wyches or Kabalite Warriors.
Details
- high-quality, fine-pored foam
- Made in Germany
- chlorine-free and acid-free
Contents
- 1 half-size foam insert as top section (HSMEXI120BO)
- 1 half-size foam insert as base section (HSMEWX045BO)
Dimensions
- 8 compartments: 57 mm long x 36 mm wide x 35 mm deep
- 4 compartments each with a rounded corner
- 4 compartments each approx. 50 mm long x 50 mm wide x 110 mm deep
- 2 of the compartments have a larger bulge
- 2 compartments: 63 mm long x 33 mm wide x 35 mm deep
Half-size foam inserts
- Top part HSMEXI120BO: 275 mm x 172 mm x 120 mm total height (110 mm usable height + 10 mm base)
- Bottom section HSMEWX045BO: 275 mm x 172 mm x 45 mm total height (35 mm usable height + 10 mm base)
